Premium 5 Rolls of 1.75mm ABS/PLA 3D Printer Filament - Neatly Wound, High Precision FDM Materials (1kg per Roll)

1：PLA Meta Filamnet

JAYO PLA Filament 1.75mm, Upgraded PLA Meta 3D Printer Filament, Diameter Accuracy ± 0.02mm Neatly Wound Filament, High Fluidity, Fast Print 3D Printing Filament, 1/1.1KG Spool

PLA META Filament Features

1. Environmental protection, non-toxic, biodegradable;
2. Soft and warm colors
3. Low shrinkage rate;
4. High strength and rigidity;
5. Very good toughness, not easy to break
6. The printing temperature is 180~200°. Lower printing temperature, means more energy saving and environmental protection, reduce printer loss.
7. Good fluidity: The printing fluency is better than the existing PLA and PLA+, greatly improving the printing success rate.
8. Good fall resistance and impact resistance: After the fall test, the fall resistance is about one times better than the existing PLA and PLA+.

PLA META Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 180-200℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles

ABS Filament

ABS Filament Features

Wire diameter: 1.75/3.0MM
Tolerance: ±0.03MM
Printing temperature:
250-260℃: 50-100mm/s
260-280℃: 100-200mm/s
Bottom temperature: 80-100℃ (with insulation chamber)
Printing speed: 40-60MM/s
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=395M
3.0MM(1KG)=130M

1. Has excellent impact strength and wear resistance;
2. Chemical resistance, dyeing properties, molding processing
And mechanical processing effect is better;
3. The support is easy to peel off;
Suitable for equipment with heating device on the bottom plate, printable
Strong requirements for printing strength and the need for follow-up
Processed models, such as: dyeing, polishing, electroplating
Etc., suitable for making small parts.

Neatly Wound Filament

JAYO has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of JAYO PETG/PLA+/WOOD/SILK PLA filament with few knots, avoiding possible breaks.

Vacuumed Sealed Packaging

JAYO 3D filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.

Shipping

* You can check parcel tracking information through this ways:

1.https://www.17track.net

2.http://track.4px.com

3. Leave a message to us, then we will check the parcel information for you.

After Sale

*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.

*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.

Contact Us

*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.

*If any questions, you may contact our customer service in 24 hours before negative feedback. We'll try our best to help you.

We look forward to cooperating with you next time!